-----:::::::::Nokia 1255 Compleate Solution :::::::::----- - Page 4

GopalChevli · 06-05-2007, 10:28 AM

Quote:

Originally Posted by ReyTech

@ALL
I hve a 1255 reliance phone and its not locked but when i put our country sim card it displays "searching" only and it never gets network? so all u experts in CDMA poeple please give me the right solution to make it work here! do i flash it or just convert it! and how to know whether the phone is ruim or NON-ruim? and which is the flashing software to use to do it? and how to check the software version of the phone? pls inform
WBR
ReyTech.

may be MIN blocked with firmware..

ReyTech · 06-06-2007, 01:34 AM

@Nitin
Tks for your reply, i hve downloaded the 1255 complete solutions posted here in this section of the forum! and i think it contains flash files as well, i was wondering if i could use it to flash my phone! and does an rs232 (t191) cable works fine if i make one withthe below pinouts? pls inform?

*RX
*TX
*GND
*NOTCONNECTED
looking forward for yur reply!
WBR
ReyTech.

ReyTech · 06-07-2007, 12:06 AM

Quote:

Originally Posted by ~N.I.T~

Use Css3 Tool And Flash With Min Unlocked File. It Will Work Fine.

@N.I.T
Well the cable is made and works fine! but there's no SPC in the phone, i cant use any thing any flasher or QPST! could some one shed some light on this issue? i did use the SPC unlocker earlier once but im not sure the cable was working or not as now there nothing in NVN_0002 or NVM_0000 fields? pls help me!
WBR
ReyTech.

ReyTech · 06-08-2007, 02:07 AM

@suresh
Tks M8! with your help i changed it to RUIM! now this is gonna work it think as now on the phone it says "insert UIM card" is this right? pls just confirm it!
WBR
ReyTech.

ReyTech · 06-08-2007, 04:47 PM

@ALL
I converted the 1255 to RUIM using qpst and selecting the option "RUIM only" and wrote the info into the phone! but now if i put any simcard in the phone it just shows "INSERT UIM CARD" wht is the problem now! do i hve to follow the below procedure to make it work?

"For converting 1255 Non Ruim to Ruim
you need
1. ccs3 flasher cracked (u get this flasher in page 2 of this thread by stanner austin )
2. QPST Tool (u get this tool in page 4 of this thread)
3. Ruim file "00000000_sp_original_ruim" for Qpst.( u get this file in page 3 of this thread)

(a) connect your 1255 with serial cable to computer
(b)open ccs3 flasher ,it will ask u the SPC click "ignore" two time.now it
show u detail of ur mobile
(c) click " Load Default" In ccs3 flasher. after reset close the ccs3 flasher.
(d) open QPST service programming tool and connect.
(e) click "Load from file" it will ask u for ruim file load "00000000_sp_original_ruim" file.
(f)click "write to phone"

pls inform anyone just tell me if i hve to do the aboe procedurre or i hve to insert any UIM card only! as right now im trying with a GSM card?
WBR
ReyTech.

GopalChevli · 06-08-2007, 05:15 PM

my friend what ur trying to do can u give me details??

if your phone asking uim sim means u have to use cdma provider sim..
NOT GSM.

abhishekh53 · 06-15-2007, 07:14 PM

Nokia 1255 Non Ruim set

Hang only when calling or call receiving position.

other functionality fine.

any solution or hints ??

abhishekh

lovingazmee · 06-17-2007, 09:39 AM

Quote:

Originally Posted by abhishekh53

Nokia 1255 Non Ruim set

Hang only when calling or call receiving position.

other functionality fine.

any solution or hints ??

abhishekh

Flash It Bro it will work fine

gsmsikar · 06-19-2007, 09:51 AM

can anyone share the process how to revive a dead 1255 ?
it is a software problem , but i am unable to connect it with the software ...

help...

Ikar · 06-23-2007, 10:34 AM

If you have not killed boot, you can use emergency download mode. Clamp simultaneously *&5 and press on. Connect this phone to CCS_tool and flash any software.

kst · 07-02-2007, 04:41 AM

1255 bin with zero esn, a new esn is easily can written with unicdma,
think somebody will be happy. Russian on the menu. And English probably.
Made in Ukraine I guess.

ShRiGsM · 09-17-2007, 04:53 PM

1=u can use et or infinity box or com1 cable when u use infinity or et u may convert port to com 1 see in 1st pic
[IMG]

[/IMG]

then press * + 5 + power on/off switch & open ccs flasher u r phone is open see 2end pic
[IMG]

[/IMG]

then click on tab bundle flashing see 3rd image
[IMG]

[/IMG]

then open flash file c:/program files/nokia/product/rh79 see 4th image[IMG]

[/IMG]

then click update remember continue press 3 emergancy mode keys tiil flashing complite see 5th image
[IMG]

[/IMG]

ShRiGsM · 09-17-2007, 05:49 PM

here the 1255 flasher it is not cracked please run setup & replace exe file
exe file in my next post

go C:\Program Files\Nokia\CCS3 Tool then replace exe file in attachment

ShRiGsM · 09-17-2007, 06:16 PM

all file rar password is mygsmindia

Flashing prosses :-
to flash dead hand set or hang on startup meen only show battery point when we start the handset to need flash in emargency mode & going to emargency mode u need press [* + 5 + power on off key ] continues tiil flashing not complited when u press both r three key u r phone can't be start but u can see u r phone position as per 2ed pic
remember u will lost u r all data meen min no. or any so do as u r risk

Cable pinout :-
here cable pinout of 1255 for infinity & et
1st = rx
2ed = tx
& for grond u need sold cable 7+8 to battry conactor ground point see image

Go there bro for procedure how to flash phone[Only registered and activated users can see links. ]
u can use this trick for
RH-79 :1255
RH-96 :1315
RM-211 : N6066
RM 218 : N6086
RM 219 : N7086
RH-103 : N1265
RH-104 : N1325
RM-307 : N2505
for flash file go there
[Only registered and activated users can see links. ]
2505 flash file[Only registered and activated users can see links. ]
2205 flash file[Only registered and activated users can see links. ]
1325 flash file[Only registered and activated users can see links. ]
FOR RAPIDSHARE LINKES THANKES TO RAJANNISHCHAL

MumbaiGsm™ · 09-18-2007, 10:20 AM

* , 5 , ON/Off key......................

06-15-2007, 07:14 PM	#52 (permalink)
abhishekh53 Senior Member Join Date: Jul 2006 Age: 32 Posts: 271 Rep Power: 7	Nokia 1255 : HANG Nokia 1255 Non Ruim set Hang only when calling or call receiving position. other functionality fine. any solution or hints ?? abhishekh

09-17-2007, 04:53 PM	#57 (permalink)
ShRiGsM Dynamic member Join Date: Mar 2007 Posts: 137 Rep Power: 7	1=u can use et or infinity box or com1 cable when u use infinity or et u may convert port to com 1 see in 1st pic [IMG] [/IMG] then press * + 5 + power on/off switch & open ccs flasher u r phone is open see 2end pic [IMG] [/IMG] then click on tab bundle flashing see 3rd image [IMG] [/IMG] then open flash file c:/program files/nokia/product/rh79 see 4th image[IMG] [/IMG] then click update remember continue press 3 emergancy mode keys tiil flashing complite see 5th image [IMG] [/IMG] Last edited by amit9000™; 09-20-2008 at 08:21 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All New SCHEMATICS Available Only Here	nikunj	Nokia	76	02-07-2012 02:03 PM
All nokia schematics	sulai2k	Nokia All Hardware & Hardware-Repair Area	70	08-12-2011 11:51 PM
NOKIA_ASIC_List	IRFANB20®	Nokia All Hardware & Hardware-Repair Area	15	10-28-2010 07:00 PM
schematics/schematics_nokia	imdad_ia	Nokia	11	09-19-2008 02:34 AM
Dct4 RPL Realtime services	chennairam	Main Sales Section	0	09-22-2007 12:13 PM

06-06-2007, 01:34 AM	#47 (permalink)
ReyTech Starter Join Date: Apr 2007 Posts: 9 Rep Power: 0	@Nitin Tks for your reply, i hve downloaded the 1255 complete solutions posted here in this section of the forum! and i think it contains flash files as well, i was wondering if i could use it to flash my phone! and does an rs232 (t191) cable works fine if i make one withthe below pinouts? pls inform? RX TX GND NOTCONNECTED looking forward for yur reply! WBR ReyTech.

06-08-2007, 02:07 AM	#49 (permalink)
ReyTech Starter Join Date: Apr 2007 Posts: 9 Rep Power: 0	@suresh Tks M8! with your help i changed it to RUIM! now this is gonna work it think as now on the phone it says "insert UIM card" is this right? pls just confirm it! WBR ReyTech.

06-08-2007, 04:47 PM	#50 (permalink)
ReyTech Starter Join Date: Apr 2007 Posts: 9 Rep Power: 0	@ALL I converted the 1255 to RUIM using qpst and selecting the option "RUIM only" and wrote the info into the phone! but now if i put any simcard in the phone it just shows "INSERT UIM CARD" wht is the problem now! do i hve to follow the below procedure to make it work? "For converting 1255 Non Ruim to Ruim you need 1. ccs3 flasher cracked (u get this flasher in page 2 of this thread by stanner austin ) 2. QPST Tool (u get this tool in page 4 of this thread) 3. Ruim file "00000000_sp_original_ruim" for Qpst.( u get this file in page 3 of this thread) (a) connect your 1255 with serial cable to computer (b)open ccs3 flasher ,it will ask u the SPC click "ignore" two time.now it show u detail of ur mobile (c) click " Load Default" In ccs3 flasher. after reset close the ccs3 flasher. (d) open QPST service programming tool and connect. (e) click "Load from file" it will ask u for ruim file load "00000000_sp_original_ruim" file. (f)click "write to phone" pls inform anyone just tell me if i hve to do the aboe procedurre or i hve to insert any UIM card only! as right now im trying with a GSM card? WBR ReyTech.

06-08-2007, 05:15 PM	#51 (permalink)
GopalChevli MyGSMIndia Team Join Date: Jul 2006 Age: 28 Posts: 566 Rep Power: 100	my friend what ur trying to do can u give me details?? if your phone asking uim sim means u have to use cdma provider sim.. NOT GSM.

06-19-2007, 09:51 AM	#54 (permalink)
gsmsikar Star Member Join Date: Jun 2006 Posts: 736 Rep Power: 7	can anyone share the process how to revive a dead 1255 ? it is a software problem , but i am unable to connect it with the software ... help...

06-23-2007, 10:34 AM	#55 (permalink)
Ikar Starter Join Date: Jun 2007 Posts: 2 Rep Power: 0	If you have not killed boot, you can use emergency download mode. Clamp simultaneously *&5 and press on. Connect this phone to CCS_tool and flash any software.

09-18-2007, 10:20 AM	#60 (permalink)
MumbaiGsm™ Senior Member Join Date: Jul 2006 Posts: 382 Rep Power: 7	* , 5 , ON/Off key......................

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)